Technical Data; Installation - Zanussi ZFC627WAP Manual De Instrucciones

Problem
It is too cold inside the freezer.
The appliance does not work at
all. Neither cooling nor lighting
works.
Customer Service
If your appliance is still not working properly after mak-
ing the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you ap-
ply for it you specify the model and serial number of
your appliance which can be found either on the guar-
antee certificate or on the rating plate located on the ex-
ternal right side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.

Technical data

Volume (gross) Litre
Volume (net) Litre
Rated Power Watt
Voltage Volts
Further technical information are situated in the rating plate on the external right side of the appliance.

Installation

Positioning
Warning! If you are discarding an old appliance
that has a lock or catch on the lid, you must
42
Possible cause
The temperature is not set correctly.
Plug is not connected to the mains
socket properly.
Power does not reach the appliance.
The appliance is not switched on.
There is no voltage in the mains
socket (try to connect another appli-
ance into it).
263 Height mm
260 Width mm
80 Depth mm
230 Weight Kg
Set a warmer temperature.
Connect the mains plug properly.
Try connecting another electrical de-
vice to the power outlet.
Switch on the appliance.
Call an electrician.
2. Replace the lamp with one of the same power and
specifically designed for household appliances.
(the maximum power is shown on the lamp cover)
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.
876 Rising Time
946 Energy Consumption
665 Freezing Capacity
44 Climatic Class
ensure that it is made unusable to prevent young
children being trapped inside.
Important! The appliance shall have the plug accessible
after installation.
Solution
hours 32
kWh/24h 0,685
kg/24h 16
SN-N-
ST-T