Profinet Connection - Lenze L-force Communication PROFINET E94AYCER Instrucciones Para El Montaje

PROFINET connection

You can use a standard Ethernet patch cable for connecting the communication module to
the fieldbus (see "Ethernet cable specifications" (^ 42)).
Mounting and dismounting of the Ethernet cables has been optimised for the use of
connectors according to the "Automation Initiative of German Domestic Automobile
Manufacturers" (AIDA).
)
Note!
Plug/remove the Ethernet cable plug in a straight manner (at right angles)
into/from the socket to make sure that the RJ45 socket will not be damaged.
Pin assignment
RJ45 socket
I
Tip!
The PROFINET interfaces are equipped with an auto−MDIX function. This
function adapts the polarity of the RJ45 interfaces such that independently of
the polarity of the opposite PROFINET interface and the cable type used
(standard patch cable or crossover cable) a connection is established.
EDK94AYCER DE/EN/FR/ES/IT 6.1
PIN
1
2
3
4
5
6
7
E94AYCXX004C 8
l
Electrical installation
PROFINET connection
Signal
Tx +
Tx −
Rx +
−
−
Rx −
−
−
6
41