asalvo 11374 Instrucciones De Uso página 10

IMPORTANT: The bedrail should be periodically
checked for its general condition with particular
reference to the security of any locking
mechanism and hinges that are used on the
product.
IMPORTANT: Additional and replacement parts
should be obtained only from the manufacturer
IMPORTANT: The bedrail should not be used
on a sleeping surface that is more than 600mm
from the floor.
IMPORTANT: Washing instructions for mesh
EN
panels: Hand wash at 20ºC.
IMPORTANT: Not suitable for use with elderly
or sick adults, or for use in a non-domestic
environment.
IMPORTANT: Bed size: min 200 cm. And max
220 cm.Mattress size: minimum length 200
cm. Maximum length of mattress 220cm.
Mattress thickness between 10 and 20 cm.
Mattress width between 90 and 100 cm.
WARNING
To prevent the risk of strangulation, it is essential
to ensure that when the side rail is fitted into
position, there is a gap of at least 10 inch
(250mm), between the bed and the corresponding
end of the side rail.
WARNING
Do not use the barrier if any part is damaged.
10