Seko MSA Serie Manual De Instalación página 4

Before installation and use of this device, please read carefully this instructional manual, standard
constructor is not responsible for any loss caused by not following instructions contained. Standard
constructor remains the right to alter any contents without notice in advance.
Warranty and scope
[1] Upon receiving the pump, please check if the products are damaged, accessories and stand-by
are contact, if any damage happens during shipment, please immediately contact us.
[2] The warranty period is one and half a year starting from the date of delivery from our factory.
[3] During warranty period, under normal use, if some parts fall off or have defect due to improper
design and manufacturing, standard constructor will repair or replace those parts free of charge.
[4] The user must pay relevant charges in the following conditions:
The warranty is expired; the pump is wrongly used or stored; Customers use bad quality s
pare parts that are produced by manufacturers not recommended by standard constructor.
Any damage that is caused by maintenance done by workers not from standard constructor or not
designated by standard constructor.
Any damage that is caused by fire, earthquake or other natural disasters;
[5] Standard constructor is not responsible for products that are made from materials designated
by customers in accordance with standards of customers.
[6] Standard constructor is not responsible for any corruption to products caused by fluid chemical
reaction or directly by fluid to be dosed. The model recommendation from standard constructor is
only for suggestion and standard constructor is responsible for any results.
[7] Trouble or damage reason should be jointly confirmed by customer and our service engineer
after detailed discussion.
[8] Standard constructor is not responsible for fees incurred by disasters during pump operation.
Maintenance
During operation, if any abnormal situation is found, please immediately stop operation and check
if pump part fails to work (please refer to the instruction manual)
[1] Please contact Standard constructor or our authorized distributor for maintenance.
[2] Please read carefully the instruction manual to check the product before calling us or our
distributor for maintenance.
[3] If the pump needs to be returned to Standard constructor, please fill Service Sheet for our
reference and facilitate maintenance:
1. Model and series number
2. Ambient environment and service life
3. Details of trouble
3. Before returning pump to standard constructor, please make sure that residues remained in the
pump chamber are thoroughly cleaned.
SPR0136037 Rev. 1.5