Operation Of The Color Monitor; Switching The Color Monitor On And Off; Adjusting The Monitor; Adjusting The Contrast And Brightness - Siemens Nixdorf MCM 1701 Instrucciones De Servicio

Operation of the color monitor

1 = Mode indicator
2 = COLOR button
3 = Controls

Switching the color monitor on and off

When switching on your PC, first turn on the monitor and then the system
!
unit. To switch off, reverse the sequence.
Power lamp
The power lamp (5) lights up when the monitor is switched on.
Switching on
Press the ON/OFF switch (6).
The power lamp lights up.
Switching off
Press the ON/OFF switch (6).
The power lamp is dark.
A26361-K316-Z1-2-6419
17" color monitor
6
5
4
3
2
1
4 = DEGAUSS button
5 = Power lamp
6 = ON/OFF switch
English - 5
17" color monitor

Adjusting the monitor

You can adjust the colors, position and size of the screen display using the
controls.

Adjusting the contrast and brightness

You will increase the life of your screen if you adjust the contrast and
i
brightness to low or medium.
Adjusting the contrast
CONT
Contrast is reduced = Turn to the right
Contrast is increased = Turn to the left
Adjusting the brightness
BRIGHT
darker = Turn to the right
brighter = Turn to the left

Setting the display size and position

The mode indicator must be dark. You can switch it on or off using the COLOR
button.
Adjusting the vertical size
Increasing the image = press the right side of the button
Decreasing the image = press the left side of the button
Adjusting the vertical position of the picture
Shifting the image up = press the right side of the button
Shifting the image down = press the left side of the button
Adjusting the horizontal size
Increasing the image = press the right side of the button
Decreasing the image = press the left side of the button
Adjusting the horizontal position of picture
Shifting the image to the right = press the right side of the button
Shifting the image to the left = press the left side of the button
6 - English
A26361-K316-Z1-2-6419