Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as shown in Fig. 2.
BSL1415
BSL1415X
3. Charging
When the battery is inserted into the battery charger, charging will commence and the
pilot lamp will light in red. (See Table 2)
NOTE: If the pilot lamp does not light or blink in red, pull out the plug from the receptacle
and check if the battery is properly mounted.
When the battery is fully charged, the pilot lamp will blink in red slowly. (At 1-second
intervals) (See Table 2)
BSL1430
Fig. 2
BSL1815
BSL1815X
BSL1830
English
9
Publicidad
Tabla de contenido
