Tightening Torques - Chicago Pneumatic CP 0077 Instrucciones De Seguridad Y De Funcionamiento

CP 0077
Periodic maintenance
Time interval, pump hour
Check Check Every
point concerns
Hoses and Leakage,
connections damage
Threaded Tightness
unions
Pump, -
complete
Oiler Oil level,
function
Ejector Fill with 8
valve drops of oil
Control Greased
valve
*If the pumped medium is very abrasive, the time
interval should be reduced to 400 hours.
The control valve must be greased with a good grade
of grease containing graphite.
In the event of breakdown or worsening pump
performance, establish the cause and rectify the fault.
Ideally, repairs should be carried out in an authorised
workshop.
9800 0556 90a | Original instructions
Every Every
8th 40th 800th*
X www.CrowderSupply.com • Toll Free: 888-883-5144
X
X
X
X
X
Safety and operating instructions

Tightening torques

A. Cap screw, 11.0-14.8 lbf/ft (15-20) Nm
Nipple and Body for oiler, 22.1-29.5 lbf/ft
B.
(30-40) Nm
C. Check valve nut, 11.0-12.5 lbf/ft (15-17) Nm
D. Nut, 22.9-25.1 lbf/ft (31-34) Nm
13