Cleaning And Maintenance - Premium PWMA231PM Manual De Uso Y Cuidado

Full automatic wash program procedure
Notes:
It is recommended to use low or mid foam detergent
The amount of detergent needed changes according to the type of clothes.
Read the instructions.
The amount of water needed varies according to the type of clothes. If the
washing machine does not work properly, adjust the water level.
16

Cleaning and Maintenance

End of Program
The washing machine will produce a sound at the end of
any program to remind you to remove the laundry.
After the sound, the washing machine will return to off with
no display or lights.
Please close the tap and unplug when not in use to avoid
water leaks and fire accidents.
Clean the water inlet
After many uses, the water inlet mesh filer may be
blocked with dirt and should be cleaned following these
steps:
1. Switch the power on, open the tap.
2. Let the washer work for 5 seconds, so water will flow
onto the tub through the inlet water hose. Turn the
power off.
3. Detach the inlet water hose, clean the mesh bag and
reinstall the inlet water assembly.
Notes:
Drain problems may be caused if the drain filter is not cleaned frequently (every 10 uses)
Maintenance
Use a soft cloth to wipe off the water and dirt on
the surface of the washer after each use. Do not
use detergents or chemicals to clean the washer
to avoid damaging
the plastic parts.
Clean the lint filter
After using the washer for a period of time, please clean
the filter following these steps:
1. Remove the lint filter.
2. Open the lint filter and wash it with water.
3. Replace the lint filter. (for magic filter)
(only for magic filter)
After using the washer for a period of time, please clean
the filter following these steps:
1. Remove the lint filter.
2. Wash it with water.
3. Replace the lint filter and adjust it.
(for normal filter)
(only for normal filter)
17