Quick Start; Main Wash - Premium PWMA231PM Manual De Uso Y Cuidado

Quick start

1 Install the washing
machine
2 Load laundry
3 Measure detergent
4 Close the lid
5 Hang up the drain
pipe firmly
Program selection
1
Press the Power button.
2 Select the proper water level and other functions
Press the Start/Pause button
3
The washer stops
When the washer stops, it will buzz continuosly 6 times and the power
will be off.
Turn off the water.
Although the power is cut off automatically, the power plug must be pulled
out for safety.
9 Press the Start/Pause button
8 Select the desired
programme
7 Plug the power supply
6 Turn on the water supply
12

Main Wash

Instructions for NORMAL procedure
[Normal] wash program is the easiest, most convenient and most common washing
program. When the user presses the power switch and then presses the [Start/Pause]
button, the normal wash program will start.
! When the washer starts, the digital display shows the remaining time. The indicator
light that stands for remaining time is flickering.
Steps in detail
1. Press the Power button.
2. According to the amount of clothes to wash, choose the proper water level.
3. Press Start/Pause button.
Instructions for single wash procedure
! The user can freely select any single procedure, or any combination of procedures
among Wash, Rinse and Spin according to his actual requirements. It only requires to
turn off any indicators that are not needed by the user and keep on the indicators
showing the process needed.
! Single wash -- after switching the power on, turn off the Rinse and Spin indicators by
pressing these two keys. The operation for single rinse and single spin is similar.
! Single wash-spin – after switching the power on, turn off the Rinse indicator by
pressing that key. The operation for single rinse-spin and single wash-rinse is similar.
Double use of detergent
1. Put the first batch of laundry and detergent into the washer and press the"Function"
button to set single a "wash" cycle.
2. Take out the laundry of the first batch after hearing the buzzing sound.
3. Put second batch of laundry in the washer, and run "Wash", "Rinse", and "Spin" cycles.
4. Take out the second batch of laundry after hearing the buzzing sound.
5. Put the first batch in the washer in and press the "Function" button to run "Rinse"
and "Spin".
！
Close the lid when the machine is running, otherwise, it will automatically stop working
during the spin process and send out an abnormal warning.
! The washer will not work until the water reaches the set water level.
! Selection of rinse water level: the rise water level is equal to the wash water level.
Press the [Rinse Level] button, the indicator light that stands for rinse level flickers.
The user can select the rinse water level according to his needs. If the rinse level
needed is different of the wash level, the user can press this button to change it. If after
pressing down the [Power] button, the [Start / Pause] button is not pressed, the power
will be automatically cut off after 10 minutes.
NOTICE
13