Available Actions; Smart Control - Samsung WF457ARG Serie Manual Del Usuario

Spin Speed
Tap this option to change the currently selected spin speed setting. The available spin speed
settings are No spin, Low, Medium, High, and Extra High. However, depending on the selected
cycle, some of them are unavailable and are shown as disabled.
Soil level
Tap this option to change the currently selected soil level setting. The available soil level settings
are Extra Light, Light, Normal, Heavy, and Extra Heavy. However, depending on the selected
cycle, some of them are unavailable and are shown as disabled. Use this option to remove stains
from your laundry effectively.
Extras
Tap this option to add or remove the extra cycles to or from the selected cycle. The available
extra cycles are Prewash, Steam, Extra Rinse, and Extra Spin. However, depending on the
selected cycle, some of them are unavailable and are shown as disabled. An extra cycle added
to the selected cycle is shown with a checked icon. For example,
Prewash cycle is added.
add it or remove it from a selected cycle.

Available actions

You can carry out additional actions and view and configure other settings using the controls
provided in the Actions section of the Cycle Selection screen.
There are six controls: Smart Control, Save as My Cycles, Delay Start, Child Lock, Light, and
Settings.

Smart Control

Tap this control to turn the Smart Control function on or off. When this function is turned on, you
can control the washer using your mobile phone.
When this function is turned off, the icon is
Turn this control on if you want to control your washer using your mobile phone.
Any actions performed on your washer will turn off the Smart Control Function (tapping the
LCD panel, pushing buttons, etc.).
Save As My Cycles
Save your favourite cycles including the temperature, spin speed, soil level and extra cycle
options. You can save up to 3 My Cycles.
For more information, refer to the "Using the My Cycle function" section on page 35.
Delay Start
Tap this control to delay the start of the selected cycle by setting a specific start time. If the
washer recognizes that the Smart Grid is available, the options for turning variable energy use on
or off are accessible. When Delay Start is turned on, the icon changes from
For more information, refer to the "Using the Delay Start function" section on page 36.
WF457ARG-03153A-07_EN.indd 31
is displayed when it is removed. Tap each enabled extra cycle to
. When it is turned on, the icon is
is displayed when the
.
to .
Washing a load of laundry _31
2013-12-13 10:40:24