About These Instructions; Information On The Model; Installation Instructions - HEIDENHAIN IK 5000 QUADRA-CHEK Manual De Instrucciones

1

About these instructions

These instructions provide all the information and
safety precautions needed for the proper mounting and
installation of the product.
1.1

Information on the model

Product designation
IK 529x QUADRA-CHEK
IK 529x QUADRA-CHEK
IK 539x QUADRA-CHEK
IK 539x QUADRA-CHEK
IK 549x QUADRA-CHEK
IK 549x QUADRA-CHEK
IK 549x QUADRA-CHEK
IK 559x QUADRA-CHEK
Further Information: "F", page 165 for system
configuration options.
ID label
The ID label is provided on the back of the IK 5000 card.
Example:
1
IK xxxx QUADRA-CHEK
2
ID 123456-xx xx
SN 12 345 678 x
1 Product designation
2 ID number
3 Index
Validity of the documentation
A document number is provided at the bottom
left on the last page of the documentation.
The documentation is valid if the document
number matches the document number
indicated at www.heidenhain.de.
For this purpose, you need to compare
the product designation, the ID number
and the index given on the ID label with
the corresponding details provided at
www.heidenhain.de.
HEIDENHAIN | IK 5000 QUADRA-CHEK | 7/2016
ID number
1109489-xx
1109490-xx
1109491-xx
1109492-xx
1109494-xx
1109495-xx
1109496-xx
1109497-xx
3
1.2 Notes on reading the documentation
The table below lists the components of the
documentation in the order of priority for reading.
WARNING
Failure to comply with the documentation may result
in fatal accidents, personal injury, or damage to
equipment.
Read the documentation carefully from beginning to
end and keep it for future reference
Documentation Description
Addendum An addendum supplements or su-
persedes the corresponding con-
tents of the Operating Instructions
and, if applicable, of the Installation
Instructions. If this document is in-
cluded in the shipment, read it first
before you proceed. All other con-
tents of the documentation retain
their validity.
Installation The Installation Instructions con-
Instructions tain all the information and safety
precautions needed for the prop-
er mounting and installation of the
product. They are an excerpt from
the Operating Instructions and are
included in every shipment. This
document has the second highest
priority for reading.
Operating The Operating Instructions contain
Instructions all the information and safety pre-
cautions needed for the proper op-
eration of the product according to
its intended use. It is not included
in the shipment and has the third
highest priority for reading. It must
be downloaded from the following
address and printed prior to com-
missioning the product:
denhain.de
Documentation These documents are not included
of connected in the shipment. They are shipped
measuring de- with the respective measuring de-
vices and other vices and peripherals.
peripherals
www.hei-
15