Ninka Qanto Instrucciones De Uso página 20

EN
Water level / straightedge
6.
Step 5:
Lay a water level or straightedge on the tray supports.
Step 6:
Loosen the screws of the safety switch and move the safety switch
screws.
20
H = H
5.
6.
4.
Step 4:
Lay the tray on the tray carrier
and check the height of the tray in
relation to the height of the mask-
ing frame once again. If the height
still is not correct, repeat Steps 2
and 3.
TX20
Safety switch
6.
Qanto_Id_A5_ 0000.50.65062-US