Ninka Qanto Instrucciones De Uso página 7

NOTICE
The power supply must be suitable for the unit otherwise electri-
•
cal components may be damaged.
A clearance of 11,82" (300 mm) must be observed between
•
Qanto and a gas stove, otherwise heat may damage the unit com-
ponents.
The electrical system of Qanto must be accessible (e.g., a
•
double socket under the cabinet near the base).
• If the control unit causes unusual noises or odours during opera-
tion, interrupt the power supply in order to avoid major damage (to
the unit).
•
Before connecting the electrical drives to the in-house power
mains, compare the voltage of the power mains with the input
voltage specified on the type plate. The mains voltage and
permissible input voltage must be identical. If not, Qanto must not
be connected, as the function of the unit may be impaired. Please
contact your specialist dealer.
At regular intervals, remove dust and dirt from Qanto trays and
•
make sure it is not damaged or cracked.
Please clean with a mild household cleaner and a soft cloth.
After that, wash off the cleaner with clear water and thoroughly
wipe Qanto trays dry. For particularly stubborn stains, use undilut-
ed household cleaner or even glass cleaner. Do not use strongly
alkaline or acidic cleaning agents, as this may damage he
surfaces of the unit.
Qanto_Id_A5_ 0000.50.65062-US
EN
7