I Want To Build A Web Server On The Lan, What Should I Do - Dynex DX-E402 Manual De Instrucciones

18
2 Click Add New. The Add or Modify a Virtual Server Entry page opens.
3 Enter
example,
4 Select Enabled for Status, then click Save.
Note: The Netmeeting sponsor should call your WAN IP, which is displayed on the Status
To enable a DMZ Host:
1 Log in to your router, click Forwarding on the left of your browser, then click DMZ.
The DMZ page opens.
2 Click Enable for Current DMZ Status, then enter your IP address into the DMZ Host
IP Address field (for example,
3 Click Save.

I want to build a Web Server on the LAN, what should I do?

Because the Web Server port 80 interferes with the Web management port 80 on your
router, you must change the Web management port number to avoid interference.
To change the Web management port number:
1 Log in to your router, click Security on the left of your browser, then click Remote
Management. The Remote Management page opens.
2 Enter a port number, such as 88 (but not 80), into the Web Management Port field.
3 Click Save, then reboot your router.
in the Service Port field and your IP address in the IP Address field (for
1720
192.168.1.169
page.
).
).
192.168.1.169
Appendix - FAQ