Sound Emission - Sistem-Air Autocleaner Manual Tecnico

Autocleaner instructions manual

14 - SOUND EMISSION

A sound level measurement has been gauged by measuring the acoustic pressure and the sound level of
the self-cleaning system during its normal functioning while mounted directly on a vacuum cleaner.
The test report is held at TECNOPLUS S.r.l. headquarters.
15 - VIBRATIONS
There is no contact between the hand, arm or body of the operator and the machine when vacuum clea-
ning using the fl exible hose; for this reason there is no risk related to vibrations.
16 - TROUBLESHOOTING
PROBLEM
Autocleaner system doesn't start
Pressure switch alarm
22
CAUSE
Alarm signalled on the
computer
The Autocleaner system has
not been activated on the
computer
The electrical connection
was not carried out
The pressure switch has
not permette to fi nish the
Autocleaner system
SOLUTION
Carry out alarm RESET
Work out activation
procedure as descripted in
the manual
Connect the multipolar
connector to the machine
inlet
Use the condensation
draining tap to empty the
air from the cylinder, call
customer service
05/07/11 Rev:1.0.0