Basic Setting - Ferroli TE FC 3V Manual De Instalación Y Funcionamiento

5

Basic Setting

Press
1 On/Off
conditioner starts operating.
Press
air conditioner stops operating.
2 Mode
Press
selection
shown below:
Two-pipe cooling and heating scenario is set before delivery
from factory by default. The scenario can be changed based
on the parameter settings according to the actual need.
Only two-pipe cooling and two-pipe cooling and heating
modes are supported if non-networked.
Scenario
Two-pipe cooling
Two-pipe cooling and
heating
Two-pipe cooling +
Auxiliary electric heater
Two-pipe heating +
Auxiliary electric heater
Two-pipe cooling and
heating + Auxiliary
electric heater
Four-pipe
. The operating status LED turns on and the air
again. The operating status LED turns off and the
The icon is displayed when the air conditioner is off.
to change the operating mode in the sequence
Cool
Fan
Cool
Fan
Cool
Fan
Cool
Fan
Cool Fan
Cool
Fan
04
Mode switch
Heat
Auxiliary
electric heater
Auxiliary Heat + Auxiliary
electric heater electric heater
Auxiliary
Heat
electric heater
Heat
Heat + Auxiliary
electric heater