Specifications - Hameg Instruments HM6050-2 Manual De Instrucciones

Specifications HM6050-2
Frequency range:
Network inductance:
Max. current:
Voltage:
Artificial hand:
PE simultating network:
Connections
Front panel:
Artificial hand:
Ground:
DUT:
Test signal output:
Rear panel:
Power:
Ground:
RS-232 Interface:
Transient Limiter
Frequency range:
Transmission less:
Max. Input voltage:
Standing wave ration (VSWR):
Miscellaneous
Ambient temperature:
Power:
Safety:
Dimensions (W x H x D):
Weight:
Color:
Subject to change without notice
9 kHz to 30 MHz
Z = 50 II (50 µH + 5 )
error < 20% acc. to VDE 0876T1
2 x 16 A continuous
230 V~ at 50/60 Hz
(factory setting)
220 pF + 511
50 II 50 µH
banana jack 4 mm
(Artificial Hand)
banana jack 4 mm
Female AC supply voltage output with PE
50 BNC jack (Test Receiver)
line cable 3 x 1,5 mm
male with PE
Alu-Block with tread 4 mm
40 x 20 x 20 mm
9-pin Sub-D, female
150 kHz – 30 MHz
f = 150 kHz – 30 MHz
a =10 dB + 1,5/ -0,5dB
f <1 kHz – a>90 dB
f >100 MHz – a>50 dB
bei P = 2 W (average) ^ = +33 dBm
U = ±50 V
DC
1,5:1 or better
10 °C to 40 °C
230 V / 115 V, 50 – 60 Hz
Safety class I (IEC 1010-01/VDE 0411)
285 x 125 x 380 mm
6 kg
technobrown
2
21