Safety Instructions; General Safety Information - Lenze L-force Controls EL 1800 Instrucciones Para El Montaje

2

Safety instructions

General safety information

2 Safety instructions
2.1 General safety information
For your own safety
}
Danger!
Disregarding the following basic safety measures may lead to
severe personal injury and damage to material assets!
Lenze drive and automation components ...
ƒ
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live, movable or
rotating parts during or after operation. Surfaces can be hot.
For Lenze drive and automation components ...
ƒ
... only use approved accessories.
... only use original manufacturer spare parts.
All specifications of the corresponding enclosed documentation must be
ƒ
observed.
This is vital for a safe and trouble−free operation and for achieving the
specified product features.
The procedural notes and circuit details provided in this document are
proposals which the user must check for suitability for his application. The
manufacturer does not accept any liability for the suitability of the specified
procedures and circuit proposals.
Only qualified skilled personnel are permitted to work with or on Lenze
ƒ
drive and automation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... who are familiar with the installation, assembly, commissioning and
operation of the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent
regulations, directives and laws applicable at the place of use.
22
l
MA_ELx8xx DE/EN/FR/ES/IT 2.0