Safety Hints - Dörr DAF-320 Manual De Instrucciones

Thank you for choosing this DÖRR product.
Please read the instruction manual and safety hints carefully before first use. Keep this instruction manual together with the device.

SAFETY HINTS

- Do not use or touch the device kit with wet hands.
- If the device is not in use for a longer period, please remove the batteries.
- Protect the device from rain, moisture and extreme temperatures.
- Do not use the device if it has been dropped. In this case a qualified electrician
should inspect the device before you use it again.
- If the device is damaged or if you notice a burnt smell: Interrupt the electronic
power supply by removing the batteries. Do not attempt to repair the device by
yourself. When service or repair is required, contact qualified service personnel.
- Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft microfiber cloth to clean the outer parts of the device.
- Store the device in a dust-free, dry and cool place.
- Keep away from children.
- DÖRR is not liable for damages caused by improper use or the failure to
observe the safety hints.
INTRODUCTION
The DÖRR DAF-320 is a system flash, which harmonizes with the functions of your Olympus or Panasonic DSLR or system camera. Our intension is that
by using the DAF-320 you will achieve much better image results than with the use of the built-in camera flash or without flash. For an optimum use of the
functions of your new flash unit, please read these instructions before starting to work with the flash.
KEY FEATURES OF THE DÖRR DAF-320
• TTL Flash Control – the required flash power is calculated and set
automatically. Perfectly illuminated pictures are guaranteed.
• +/- Correction - for adaption to difficult light conditions
• Powerful Flash – guide no. 32; the flash ranges up to 15m (at ISO 400
and aperture setting F4.0)
• Manuel Power Setting– of great advantage for complex or creative
picture composing
• Flash Head can be bounced and tilted – for indirect flash ensuring
softer light characteristics
• Strobe Flash – for creative image effects
• LED Modelling Light – ensures precise autofocus even at low
ambient light
• Sleep Function – auto power saving mode
• Slave Mode – for wireless and external use of the DAF-320 flash unit
• Stable Metal Flash Head
• Overheating Protection
• LCD – displays all settings
GB INSTRUCTIONS FOR DÖRR DAF-320 TTL FLASH OLYMPUS / PANASONIC
BATTERY HINTS
Only use high-quality batteries of popular brands. When inserting the batteries,
please note correct polarity. Do not insert batteries of different types. Please
remove batteries when device is not in use for a longer period. Do not charge the
batteries - risk of explosion! In case of contact with battery acid rinse the affected
area immediately with water and contact a doctor. Do not dispose of batteries in
household waste.
NOMENCLATURE
Main switch & Assist
1
Light Button
2 LC display
3 C2 button
4 Arrow key right
5 SET button
Clamp collar
6
Arrow key left
7
8 Flash ready indicator
9 MODE button
10 C1 button
11 Button for test flash and
strobe modelling light
2
Flash head
12
13 LED modelling light
14 Battery compartment
15 Unlock key for battery compartment
16 Locking pin
17 USB charging socket
Flash contacts
18
Wireless sensor
19