Klarstein Ice Volcano 2G Manual De Instrucciones página 23

How to set the timer
Press the TIMER button first, the default delay time is 1.0 hour displayed delay time in
LCD display window, then press the SELECT button to select your desired delay time.
Each press SELECT button one time, the delay time will increase 0.5 hour, but if you
always press the SELECT button, the delay time will change very quickly. During the
process of delay time adjusting, the letter "H" will flash, then after 5 seconds flashing
wit- hout pressing, the "H" letter will change from flashing to always displaying, means
the timer program has been completed.
How to cancel the timer
When the unit has been set with the timer, press the TIMER button, then the delay time
digit and "H" letter display will disappear, mean the timer set has been canceled.
1 = Timer delay time
2 = Means Hour, and timer setting duration
EN
23