GE Profile Advantium PSA9120 Manual Del Usuario página 38

Questions?
Problem
Use this
DISPLAY
problem The display is blank.
solver
Control Panel "LOCKED" appears
in display.
Control display is lighted yet oven
will not start.
The door and inside of the oven
feels hot.
Floor of the oven is warm, even
when the oven has not been
used.
Oven will not start.
Glass microwave tray does not
lock into center hub.
38
Possible Causes
The display has been turned off.
The control has been locked.
Clock is not set.
Door not securely closed.
Start/Pause pad not pressed
after entering cooking selection.
Delay Start was accidentally set.
Oven is in DEMO Mode.
Cancel/Off was pressed
accidentally.
The oven produces intense heat
in a small space.
The cooktop light is located below
the oven floor. When the light
is on, the heat it produces may
make the oven floor get warm.
A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
Plug not fully inserted into wall
outlet.
Troubleshooting
Advantium Oven
What to Do/Explanation
Check the Settings menu for
clock display settings. Turn the
display on.
Press and hold Cancel/Off for
about 3 seconds to unlock the
control. See Other Features
Section.
Follow prompts to set the clock.
Open the door and close securely.
Follow prompts.
Press Cancel/Off and reset.
Unplug the oven for 1 minute,
then plug the oven back into the
wall. DO NOT set the oven clock;
press and hold the HELP and
START/PAUSE pads for 3 seconds.
The control should exit DEMO
mode. Set clock and continue.
Reset cooking program and press
Start/Pause.
This is normal. Use oven mitts to
remove food when ready.
This is normal.
Replace fuse or reset circuit
breaker.
Unplug the oven, then plug it
back in.
Make sure the plug on the oven is
fully inserted into wall outlet.
Align the protrusion on the
bottom of the glass microwave
tray with the indentation in the
turntable. This fit is not tight,
some movement is normal.