Fagor LE-120 Manual De Instrucciones página 10

Batidor de leche
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. OPERATING THE APPLIANCE FOR THE FIRST TIME
Clean the appliance thoroughly before using for the first
time. 2 batteries, type AA, are included in the scope of
supply.
Method:
• 1. Push in both of the release buttons.
• 2. Remove the battery casing.
• 3. Insert both batteries in the compartment.
Take note of the correct polarity.
• Replace the battery casing. The casing must click into
place.
To froth milk
For preferred use fill a tall oval receptacle 1/3 with milk.
* Please note
Use milk that is between fridge-cold up to max. 60° warm
for frothing.
You can froth almost every type of milk; whether fresh or
pasteurised, skimmed or full-fat. The best results are
achieved using fridge-cold milk with a fat content of 1.5%.
• Hold the appliance and immerse the whisk head in the
milk.
• Press the push-button to activate the frothing.
• Move the appliance up and down slowly.
Ensure that the whisk head remains completely
immersed in the milk.
* Please note
• Whilst frothing, ensure that the insertion rod and whisk
head are not bent.
• After producing the required amount of milk froth, let
go of the push-button, wait until the whisk head comes
to a complete standstill and take out the appliance.
• Do not use harsh or abrasive cleaning
agents!
• Clean the casing with a dry, soft cloth.
• Clean the insertion rod and whisk head immediately
after each use to prevent permanent residues and
deposits.
For this rinse the insertion rod and whisk head under
cold water.
-
+
6. USE
7. MAINTENANCE
8
-
+

Publicidad

Tabla de contenido
loading

Tabla de contenido