Insignia NS-DA1G Guia Del Usuario página 11

2. In the Audio menu, select Repeat , then press
3. Press
track), or Off .
4. Press
appears on the Now Playing screen next to the battery icon.
Repeating segments of a track
You can use A-B repeat to repeatedly play a segment of a track. You must first enable A-B
repeat.
To enable A-B repeat:
1. Press (Menu). The main menu opens.
2. Press
3. Press
4. Press
(Play/Pause).
5. Press
message "Use the down button (V) to activate A-B" appears, then the Audio Setting
menu opens again.
6. Press (Menu) to return to the Now Playing screen.
To repeat an audio segment:
1. During playback, press
display shows an "A."
2. Press (Down) again to mark the end of the playback loop. The Repeat icon on the display
shows an "AB" and the player repeats that audio segment indefinitely.
3.
Press (Down) again to cancel the repeating loop.
Using the equalizer
Six equalizer settings are available, and five are preprogrammed: Normal, Rock, Jazz, Classic,
and Pops. The User setting lets you customize the equalizer to your preference.
To select a pre-programmed equalizer setting:
1. In the Settings menu, select Audio , then press
2. In the Audio menu, select Equalizer , then press
3. Press
4. Press
To change the equalizer's custom setting:
1. In the Settings menu, select Audio , then press
2. In the Audio menu, select Equalizer , then press
3. Press
4. Press
5. Press
remaining dial.
(Up) or (Down) until you select All (repeat all tracks), One (to repeat a single
(Next) or (Play/Pause) to save your setting. The Repeat 1 or Repeat All icon
(Up) or (Down) to highlight Settings , then press
(Up) or (Down) to highlight Audio , then press
(Up) or (Down) to highlight A-B repeat , then press
(Up) or (Down) to highlight On or Off , then press
(Down) to mark the start of the playback loop. The Repeat icon on the
(Up) or (Down) to select the equalizer setting you want.
(Next) or (Play/Pause) to save your new settings.
(Up) or (Down) to select the Custom setting.
(Next) to move the cursor to the first equalizer setting dial.
(Up) or (Down) to adjust the setting. Repeat this step to adjust each
(Next) or (Play/Pause).
(Next) or
(Next) or
(Next) or
(Next) to select. The
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Play/Pause).
(Play/Pause).