Charging The Internal Battery Of The Unit - DieHard DH155 Manual Del Propietário

Energía portátil y arrancador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

running cold water for at least 10
minutes and get medical attention
immediately.
2.5 NEVER smoke or allow a spark
or flame in vicinity of battery or
engine.
2.6 Be extra cautious to reduce risk of
dropping a metal tool onto battery.
It might spark or short-circuit
battery or other electrical part that
may cause explosion.
2.7 Remove personal metal items
such as rings, bracelets,
necklaces, and watches when
working with a lead-acid battery.
A lead-acid battery can produce a
short-circuit current high enough
to weld a ring or the like to metal,
causing a severe burn.
2.8 When charging the internal
battery, work in a well ventilated
area and do not restrict ventilation
in any way.
3. FEATURES
3
2
1

4. CHARGING THE INTERNAL BATTERY OF THE UNIT

IMPORTANT! CHARGE
IMMEDIATELY AFTER
PURCHASE, AFTER EACH
USE AND EVERY 30 DAYS, TO
KEEP THE Unit's INTERNAL
BATTERY FULLY CHARGED AND
PROLONG BATTERY LIFE.
4.1 CHECKING THE LEVEL OF THE
INTERNAL BATTERY
Press the Battery Status button
on the front of the unit. The LED
lights will indicate the current
charge level as follows:
4
5
6
2.9 Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery
may cause irritation or burns.
2.10 Do not expose a power pack to
fire or excessive temperature.
Exposure to fire or temperature
above 265°F (130°C) may cause
explosion.
2.11 Have servicing performed by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
product is maintained.
2.12 Attach output cables to a battery
and chassis as indicated below.
Never allow the output clamps to
touch one another.
1. Battery clamps
2. 12V DC power outlet
3. Battery status button
4. Battery status indicators
5. Built-in work light
6. Worklight ON/OFF switch
RED – less than 20% of full charge;
immediately charge the unit.
YELLOW – 20-80% of full charge.
GREEN – more than 80% of full
charge.
4.2 CHARGING THE INTERNAL
BATTERY
Charge the internal battery for the
unit using an extension cord (not
included).
NOTE: Use of an improper
extension cord could result in a
risk of fire and electric shock.
• 4 •

Publicidad

Tabla de contenido
loading

Tabla de contenido