Onkyo LS5200 Manual De Instrucciones página 12

> Before Start > Part Names
1
3 mm
or less
4 mm
a
3
c
a Wall mount bracket for front speakers, b Speaker cable, c Screw for wall mount bracket (M5k10)
> Install > Initial Setup
2
b
> Playback
Advanced Setup | Firmware Update | Others
When Fitting the Front Speakers to the Wall
1. Use commercially available screws to install the included
wall mount brackets.
0 The screws to fit the brackets to the wall are not
included. Consult with a professional to make sure you
select the type, material, length, etc., that will provide
sufficient support. Add a reinforcing plate or anchor if
reinforcement is necessary.
0 Onkyo accepts no responsibility for damage or injury
that arises due to incorrect fitting, incomplete fitting,
incorrect use, or acts of nature.
2. Connect the included speaker cables to the speaker
terminals.
3. Use the included screws (M5k10) to attach the speakers
to the wall mount brackets.
E
N
11