Onkyo LS5200 Manual De Instrucciones página 35

> Before Start > Part Names
Impose OSD Set whether or not to display the information on the TV when the
volume is adjusted or input is changed, for example.
"On (Default Value)": OSD displayed on the TV
"Off": OSD not displayed on the TV
0 OSD may not be displayed depending on the input signal
even if "On" is selected. If the operation screen is not
displayed, change the resolution of the connected device.
Screen Saver Set the time to start the screen saver.
Select a value from "3 minutes (Default Value)", "5 minutes", "10
minutes" and "Off".
■ 2. HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
BD/DVD "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the BD/DVD input selector. If you do not assign
a jack, select "-----". To select an HDMI IN jack already assigned
to another input selector, change the input selector setting to "---
--" first. (Default Value is "HDMI 1 (HDCP 2.2)")
CBL/SAT "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the CBL/SAT input selector. If you do not assign
a jack, select "-----". To select an HDMI IN jack already assigned
to another input selector, change the input selector setting to "---
--" first. (Default Value is "HDMI 2 (HDCP 2.2)")
GAME "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the GAME input selector. If you do not assign a
jack, select "-----". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "-----"
first. (Default Value is "HDMI 4 (HDCP 2.2)")
STRM BOX "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the STRM BOX input selector. If you do not
assign a jack, select "-----". To select an HDMI IN jack already
assigned to another input selector, change the input selector
setting to "-----" first. (Default Value is "HDMI 3 (HDCP 2.2)")
34
> Install > Initial Setup > Playback
CD "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the CD input selector. If you do not assign a
jack, select "-----". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "-----"
first. (Default Value is "-----")
TV "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the TV input selector. If you do not assign a jack,
select "-----". To select an HDMI IN jack already assigned to
another input selector, change the input selector setting to "-----"
first. (Default Value is "-----")
PHONO "HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)": Assign a desired
HDMI IN jack to the PHONO input selector. If you do not assign
a jack, select "-----". To select an HDMI IN jack already assigned
to another input selector, change the input selector setting to "---
--" first. (Default Value is "-----")
■ 3. Digital Audio Input
You can change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "-----".
BD/DVD "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the BD/DVD input selector. (Default Value is "-----")
CBL/SAT "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the CBL/SAT input selector. (Default Value is "-----")
GAME "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the GAME input selector. (Default Value is "-----")
STRM BOX "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the STRM BOX input selector. (Default Value is "-----")
CD "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the CD input selector. (Default Value is "COAXIAL")
TV "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the TV input selector. (Default Value is "OPTICAL")
PHONO "COAXIAL", "OPTICAL": Assign a desired DIGITAL IN jack to
the PHONO input selector. (Default Value is "-----")
Advanced Setup | Firmware Update | Others
E
N