Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
> Before Start
> Part Names
1. Source Connection
Check that each input source is connected correctly. Follow
the guidance, select the input you want to confirm, start play
of the selected player, and confirm that the images appear
on the TV and that sound is played.

2. Network Connection

Set up Wi-Fi connection with an access point such as a
wireless LAN router. There are the following two methods of
connecting by Wi-Fi:
"Scan Networks": Search for an access point from this
unit. Find out the SSID of the access point beforehand.
"Use iOS Device (iOS7 or later)": Share the iOS device's
Wi-Fi settings with this unit.
If you select "Scan Networks", there are a further two
choices of connection method. Check the following.
0 "Enter Password": Enter the password (or key) of the
access point to connect.
0 "Push Button": If the access point has an automatic
connection button, you can connect without entering a
password.
0 If the SSID of the access point is not displayed, then in
the screen listing the SSIDs, select "Other..." with the
button on the remote controller and press ENTER, then
follow the on-screen instructions.
Wi-Fi Setup
a
b
c
d
e
f
g
h
i
n
o
p
q
r
s
t
u
v
1
2
3
4
5
6
7
8
9
,
.
/
;
:
@
[
]
A/a
When finished, select the "OK" key.
All Erase
Keyboard input: To switch between upper and lower case,
> Install
select "A/a" on the screen and press ENTER. To select
whether to mask the password with "*" or display it in plain
text, press MEMORY on the remote controller. Pressing
CLEAR will delete all the input characters.
Privacy policy: A confirmation screen asking you to agree
to the privacy policy is displayed during network setting.
Select "Yes" and press ENTER to indicate agreement.
3. Audio Return Channel
If you have connected a TV that supports ARC, select
"Yes". This unit's ARC setting turns on and you can listen to
the TV's audio through this unit.
0 If you select "Yes", the HDMI CEC function is enabled
and power consumption increases during standby.
j
k
l
m
w
x
y
z
0
-
^
\
OK
Hide/Show
A/a
> Initial Setup
> Playback
Advanced Setup | Firmware Update | Others
E
N
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido