Briteq WR-DMXG4 Manual De Instrucciones página 5

ENGLISH
FUNCTIONS
1. ANTENNA
2. SETUP BUTTON: used to connect / disconnect the wireless link between units, different functionality for
the transmitter and receiver:
WT-DMXG4 – Transmitter:
 Start connection procedure: press the setup button shortly.
 All receivers that are currently not connected to a transmitter will be automatically connected.
 All receivers already connected to the transmitter start blinking (status led) together with the
status led on the transmitter.
 Disconnect ALL receivers: press the setup button for +/-5sec, the status led turns off and all
connected receivers will be disconnected.
WR-DMXG4 – Receiver:
 Disconnect the receiver: press the setup button for +/-5sec, the status led turns off and the
receiver will be disconnected from the transmitter. The receiver is ready to make a new connection
with a transmitter.
3. STATUS LED: shows the status of the wireless connection.
WT-DMXG4 – Transmitter:
 LED on / slow blinking: the unit is on an sending.
 LED blinking fast: the transmitter is sending the connection request signal to the receivers.
 All receivers that are currently not connected to a transmitter will be automatically connected.
 All receivers already connected to the transmitter start blinking (status led) together with the
status led on the transmitter.
WR-DMXG4 – Receiver:
 LED on: the unit is connected to a receiver.
 LED off: the unit is not connected to a transmitter and ready to receive a connection request signal
from a transmitter.
 LED blinking fast: the receiver receives a connection request signal, two possibilities:
 The receiver is currently not connected to a transmitter: it will be automatically connected.
 The receiver is already connected to the transmitter that sends the connection request signal:
status led blinks together with the status led on the transmitter to indicate that both are
connected.
4. POWER SWITCH: Used to switch the unit ON or OFF
5. SAFETY EYE: used to attach a safety cable when the unit is rigged (see paragraph "overhead rigging")
CONNECTIONS WT-DMXG4 TRANSMITTER
BRITEQ
®
3/30
OPERATION MANUAL
WIRELESS DMX SYSTEM