Risco VUpoint RVCM32W Guia De Instalacion página 15

4. Click the Network Cameras link in the left-hand column; the IP Camera List
page is displayed.
5. Click Add Camera; the Add Camera dialog box is displayed.
6. Select the RISCO P2P Camera type.
7. Define the following fields in the Add Camera dialog box.
Field Description
Enter a name for the camera
Label
Select the partition(s) from the list of defined partitions
Partitions
Choose the RISCO P2P Camera type (for ONVIF or Generic camera type
Type
settings, refer to the RISCO Cloud Installer Application Manual)
Enter the MAC address into this field. The MAC address (media access
MAC
control address) is the unique identifier assigned to the IP camera for
Address
communications on the physical network.
NOTE: The MAC address is case sensitive and should be entered exactly as
it is shown on the box or on the back cover of the IP camera, e.g.
AA:BB:CC:DD:EE:FF
Figure 6 Control Panel Update Page
Figure 7 IP Cameras List
Figure 8 Add Camera
13