Risco VUpoint RVCM32W Guia De Instalacion página 20

Additional fields are displayed in the Add Trigger dialog box according to the
event type that you selected (see examples below for Partition and Detector event
types).
Figure 19 Add Partition Event Trigger
4. Define the following fields in the Add Trigger dialog box according to the
event type that you selected.
Field Description
Partition(s)
Select the partition(s) from the list.
NOTE – Only partitions associated with
the camera are displayed.
Detectors Select the detector from the list
5. Define the following image (still) and clip (video) definitions:
Field Description
Images Pre-event starting time (sec) – time, before the actual event occurred, to
(still) start displaying still images.
Number of images – number of still images to display.
Interval between images (sec) – time required between each still image.
Clips Pre-event starting time (sec) – time, before the actual event occurred, to
(video) start displaying video clip.
Duration (sec) – total duration of the video clip
NOTE – These fields are currently locked and the default parameters
cannot be changed.
NOTE: To be able to record video clips, make sure to insert an SD Card and then
power down/up the camera.
Figure 20 Add Detector Event Trigger
Event Type
Partition events only
Detector events only
18