Amp Device Mode; Tun Device Mode; Cd Device Mode; Bd Device Mode - Arcam FMJ A29 Manual De Instrucciones

AMP Device Mode

The A Device Mode button configures the CR902 to
control your Arcam amplifier. Pressing this button does
not affect the currently selected input on the amplifier.
P Toggles power between standby and on
Cycles through the front panel display's
DISP
brightness options
Displays the amplifier setup menu on the
MENU
front panel
Navigate menus
Toggles the mute function of the amplifier
@
Decrease ( ) and increase ( ) amplifier
– +
Vol-
Vol+ volume
Adjusts the balance between the left and
BAL
right audio channel

TUN Device Mode

The T Device Mode button configures the CR902 to
control the tuner functions of Arcam tuners.
P Toggles power between standby and on
The numeric keys are used to store and
0 9
...
recall presets
Cycles through the front panel display's
DISP
brightness options
Cycles through tuner sources
BAND
Rewind iPod
)
( Fast forward iPod
Preset down/Sirius category down/iPod
]
track back
Preset up/Sirius category up/iPod track
[
forward
# Stop iPod
$ Play/pause iPod
& Play/pause iPod
Cycle through iPod shuffle modes
SHUFF
Displays the tuner setup menu on the front
MENU
panel
Preset up/down, iPod track back/forward
' ,
< > Decrement/increment tuning frequency
Confirm a selection
O
Cycle through iPod repeat modes
RPT
Toggle FM mode between mono and stereo
FM MONO
reception
Enter/Exit Preset recall mode
P/TUNE
Enter/Exit Preset store mode
STORE
Cycles through available tuner bands
BAND

CD Device Mode

The c Device Mode button configures the CR902 to
control the CD functions of Arcam CD players.
P Toggles power between standby and on
! Open/close disc tray
The numeric keys allow direct access to
individual tracks on a disc. To select a track
press the corresponding keypad button.
0 9
...
For tracks greater than 9, enter the digits
in sequence. For example, to play track 15,
press 1 , then press 5 .
Cycles through the front panel display's
DISP
brightness options
Changes the available display modes on the
MODE
CD player
) Fast rewind
(
Fast forward
Skip back to the start of the current/
]
previous track
[ Skip forwards to the start of the next track
#
Stop playback
$
Play
& Toggles pause of playback
Toggles random ('shuffle') play on and off
SHUFF
Enter a track in a programmed track list
MENU
Navigates track listings if supported by the
player O selects the currently highlighted
track if supported by the player
Repeat playback of the disc or pre-
programmed selection of tracks. To repeat a
RPT
particular track, select that track and press
twice. To cancel, press a third time.
RPT RPT
Toggles between Programme and Normal
SETUP
play
A-B repeat function
AUDIO
Toggles between selecting the HD and CD
SUBT
layer of SACD disc
E-12

BD Device Mode

The B Device Mode button configures the CR902 to
control the BD functions of Arcam BD players.
P
Toggles power between standby and on
! Open/close disc tray
The numeric keys allow direct access to
individual tracks on a disc. To select a track
press the corresponding keypad button.
0 9
...
For tracks greater than 9, enter the digits
in sequence. For example, to play track 15,
press 1 , then press 5 .
Cycles through the front panel display's
DISP
brightness options
Changes the available display modes on the
MODE
BD player
)
Fast rewind
( Fast forward
Skip back to the start of the current/
]
previous track
[ Skip forwards to the start of the next track
# Stop playback
$ Play
&
Toggles pause of playback
Changes audio decode format (Dolby
AUDIO
Digital, DTS, etc.).
Activates BD player menu.
MENU
Navigates track listings if supported by the
player O selects the currently highlighted
track if supported by the player
Returns navigation to the top level of the
.
menu ('Home').
When navigating a menu, press this key to
RTN
return to the previous screen or selection
Toggles random ('shuffle') play on and off
SHUFF
Repeat playback of the disc or pre-
programmed selection of tracks. To repeat a
RPT
particular track, select that track and press
twice. To cancel, press a third time.
RPT RPT
Toggles between selecting the HD and CD
SACD
layer of SACD disc