Connection Diagrams; Install The Hardware - Axis M11-E Serie Guia De Instalacion

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 15 mA
3
I/O configured as input
4
I/O configured as output

Install the Hardware

Important
AXIS M11 Series is designed for indoor and outdoor use. To use the camera outdoors, install
in an approved outdoor housing. See www.axis.com for more information about outdoor
housings.
1. If using a microSD card for local storage, insert the card into the camera's SD card
slot, see Hardware Overview on page 8.
2. Install the wall mount, see page 16.
3. Install the housing, see page 18.
AXIS M11-E Network Camera Series
1
2
3
4
15