Changing The Password; Adjusting The Vga Picture - Insignia NS-LTDVD19 Guia Del Usuario

4 Press the number buttons to enter the
password. The default password is 0000.
The Parental Control Menu screen opens.
Note
The Advanced Rating option appears only in
Digital TV mode.
5 Press CH+ or CH– to select US Ratings or
Canadian Rating, then press VOL+ or
ENTER. The one of the following ratings
screens opens.
6 Press CH+ or CH– to select the rating you
want to block, the press VOL+ or ENTER.
The rating you selected and all higher ratings
are blocked.

Changing the password

To change the password:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Password
Set.
12
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
3 Press VOL+ or ENTER. The Enter OLD
Password screen opens.
4 Press the number buttons to enter the old
password. If you have not set a password,
enter the default password 0000.
5 When prompted, enter the new password
twice.
Note
If you change the password then forget it, enter
9443.

Adjusting the VGA picture

To adjust the VGA picture:
1 Make sure that your LCD TV/DVD combo is
connected to a computer through the VGA
connections.
2 Press INPUT one or more times to select
VGA.
3 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
4 Press VOL+ or ENTER, then press CH+ or
CH– to select VGA Set.
5 Press VOL+ or ENTER. The VGA Setting
screen opens.
6 Press CH+ or CH– to select an option, then
press VOL+ or VOL– to adjust the option.
You can select:
• H-Position–Moves the screen image left
or right.
• V-Position–Moves the screen image up
or down.
• Clock–Minimizes any vertical bars or
stripes in the screen image.
• Phase–Minimizes any horizontal
distortions and sharpens the screen
image.
www.insignia-products.com
50
50
50
50
/OK Select /Exit/Menu Exit