Tabla de contenido
Publicidad
Enlaces rápidos
Models/Modelos/Modèles
63070LF & 63970LF
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your
Brizo
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
www.brizo.com
HIGH-RISE PULL-DOWN KITCHEN
AND BAR / PREP FAUCETS
LLAVES DE AGUA ELEVADAS,
DESLIZABLES HACIA ABAJO,
PARA COCINAS Y BARES / PREP
ROBINET À COL DE CYGNE ET
BEC-DOUCHETTE POUR ÉVIER
DE BAR OU D'ÎLOT DE CUISINE
1
11/18/15
Rev. D
Publicidad
Tabla de contenido
Manuales relacionados para Brizo VENUTO 63070LF Serie
Resumen de contenidos para Brizo VENUTO 63070LF Serie
- Página 1 Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Brizo faucet you will need: ® • To READ ALL the instructions completely before beginning.
- Página 2 Modèle Model / Modelo / 63070LF & 63970LF RP60111▲ Spout Assembly RP60109▲ Ensamble del Tubo de Salida Spout Assembly Ensamble del Tubo de Salida RP60113▲ Friction Ring & Isolator Sleeve RP60110▲ Sprayer Assembly Anillo de la Fricción y Funda del Aislador (includes aerator) Boucle de Frottement et Douille D’isolant RP80977...
-
Página 3: Accessory Order Only Orden De Accesorio Solamente Livrable Séparément Seulement
Should your local plumbing codes require an atmospheric type vacuum breaker one must be purchased separately. Sistema de protección contra el contraflujo RP42881 Su llave de agua tipo deslizable Brizo tiene un sistema de protección ® Pump RP30395... -
Página 4: Instalación Opcional De Una Chapa
OPTIONAL Mount Faucet to Deck Optional Escutcheon Installation Remove adhesive backing on trim ring gasket (1) Install the mounting bracket (1) and nut (2) onto the For optional installations using the 10" and press into place on trim ring (2). Slide trim ring mounting shank (3) using wrench (4). -
Página 5: Hose Installation
Hose Installation Press fit hose guide (1) into end of hose (2) as shown. Thread the spray head (3) Turn spout opposite handle to aid hose installation. Feed hose (1) up through spout (2). After the end of the hose passes through the shank (3) remove the onto the hose fitting (4) to prevent the hose from being pulled into the spout until hose guide. - Página 6 Incorrect Installations. Instalacións incorrecta. Installations incorrecte. Push hose end (1) onto faucet outlet (2). Attach clip (3) over hoses as shown. Pull down moderately to ensure connection has been made. Deje pasar el extremo de la manguera (1) por la salida de la llave de agua / grifo (2). Conecte el gancho (3) sobre las mangueras como se muestra.
-
Página 7: Conexiones Especiales
Water Line Connections Potential Problems and Remedies acceptable installation, be sure to read the instructions and plan ahead. When cutting the l Tubing is not cut perpendicular to the axis of the Ensure all fittings and end connections are free of debris. supply tubing the installer accepts the responsibility tube: carefully make an additional cut, being careful Faucet fittings (1) are 3/8"... -
Página 8: Correct Method Método Correcto Bonne Méthode
Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte boca abajo. esté recto. Custom Fit Connections - Plastic Sleeve Installation Instructions 1. - Página 9 Turn on hot and cold water supplies (1). Pull the hose assembly (2) out of the spout and remove the sprayer (3). Be sure to hold the end of the hose down into Sprayer will lock into position when brought into proximity of the spout the sink and turn faucet handle (4) to the mixed position.
-
Página 10: Mantenimiento
Maintenance Optional Temperature Indicator Ring: Remove cap (6) by rotating counterclockwise. Bonnet If required, a red/blue indicator ring (9) can be If faucet exhibits very low flow – A. Remove and clean aerator (1), or may be stiff due to O-ring, but should rotate by hand. installed under decorative cap. -
Página 11: Instalación Del Dispensador Del Jabón - Orden De Accesorio Solamente
Accessory Order Only Orden de Accesorio Solamente Livrable séparément seulement Soap Dispenser Installation - Accessory Order Only Separate head (1) from body assembly (2). Make sure gasket (3) is properly seated in the base of the body assembly. Insert body assembly through selected hole in sink. Secure body assembly to sink with nut (4). - Página 12 This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.