Troubleshooting Guide - Slendertone ReVive S5 Manual De Instrucciones

T ROU BLE S HOOT ING G UIDE
T ROUBLE S HOOT ING G UIDE
PROBLEM
The display doesn't come on &
there is no signal from the unit
The control unit is on, but there
is no signal
The battery symbol is flashing /
ineffective stimulation
The stimulation is very weak even
when the intensity is high
14
POSSIBLE CAUSES
Battery incorrectly inserted
The battery is dead
Lead(s) not fully inserted in
sockets
Intensity is too low
The battery is low
The battery is low
Low-quality batteries used
Unit has been paused
The batteries are low
The GelPads are worn
Poor GelPad positioning
GelPads are not connected to
leads or fully on the skin
Low-quality batteries used
English
SOLUTIONS
Reposition the battery as per page 9
Replace the battery as per page 9
Re-insert leads correctly
Increase the intensity
Replace the battery
Replace the battery
You should only use a high-quality, 9V
alkaline battery with your unit
Press the On/ Off key briefly
Replace the batteries
Visit the website or contact your local
retailer for new GelPads
See s 11-13 for the correct GelPad posi-
tioning
Reconnect the GelPads and ensure they
are placed flat against your skin
Use high-quality, 9V alkaline batteries
www.slendertone.com