Flamingo HOME MONITOR FA703IP Manual De Instrucciones página 23

5. Managing your camera using
your smartphone
Make sure your camera(s) is/are connected to your smartphone
via the Flamingo "Plug to view" App (see section 4.1 and 4.2).
5.1. Viewing your camera image on your
Android smartphone
The home screen of the App consists of the following tabs
WAN : here you can see all the available cameras.
D1
LAN : here you can see all the available cameras that are
D2
connected via a Wi-Fi connection.
File : all "screencaptures" / photos and videos are saved
D3
here.
Event : here you can see when your camera has been
D4
online and offline and here you can find alarm
reports when movement has been detected.
More : here you can share files with friends, update the
D5
app, learn more about the app, motion detection
and / or switch the Offline Push on or off, and
view information about the storage space on your
smartphone.
On the WAN tab click on the camera you want to manage. The
camera image appears on your smartphone
Attention! If you do not have a picture it is possible that your
wireless connection is not fast enough. In that case change the
resolution of your camera image (see section 5.1.1)
The camera screen provides a number of options:
• Click the listen / speak
headphones and a microphone appear.
• Click on the headphones
camera is recording.
: • Click on the microphone
D
the camera.
• Click on the headphones or microphone again to switch
off the aforementioned function(s).
• Click on the Snapshot button
camera image
• Press the Video button
video button again to end the video recording.
• Click on the PTZ button
can mirror the image, you can zoom in and out and refresh the
camera image.
.
J
button, in the camera image
J1
to listen to the sound that the
K
to speak using the speaker of
L
to take a picture of your
J2
to start recording a video, press the
J3
to use the control panel. Here you
M
23