Initial Start-Up; Station Sorting - Loewe DVB-T Instrucciones De Manejo

Initial start-up

Note: A station search is necessary in both bands with most satellites.
H) The standard frequencies 9750 MHz and 10600 MHz are entered for
the low-band and high-band.
If your satellite antenna is fitted with an LNC (LNB) with a different
oscillator frequency, enter the corresponding frequency for high and
low band respectively.
Note: The correct display for the reception frequencies in the menu
„Set station manually" depends on this setting!
I) You should see a picture and hear the sound with the settings
previously carried out (only for ASTRA 1 and HOTBIRD). Now press
OK.
J) You can select the default pre-programming in the menu „Pre-
programming" for fast programming of the satellite stations.
Please select „No" to ensure that all stations currently receivable are
searched for and saved.
Symbol rates: The standard symbol rates 22000 and 27500 are
entered.
If you wish to receive stations with other symbol rates, please enter
the corresponding values here using the number buttons of the
remote control.
K) With OK you get an overview of which settings are to be used for
automatic programming.
L) Press the OK key again, the station search starts.
The TV searches for, sorts and stores all the receivable TV stations
according to their settings and the connected antennae.
M) When the TV stations are stored, you get an appropriate message.
Radio stations are then searched for with OK .
N) After storing the radio stations you get the "Connections" menu by
pressing the OK key.
Select "Yes" if you want to connect/log in a VCR, DVD player etc..
Follow the "Connection wizard" and connect the equipment to the TV
set according to the connection diagram.
The menu is hidden if you select "no".
6
DVB_T_S_GB_F_Esp 6
Note
You can repeat the initial start-up at any time, e.g. after moving.
The "Repeat initial start-up" function deletes any stations already
stored!
Press the INFO key..
Then select the item "Repeat initial installation".
Then select "Repeat initial start-up".
Then start "Initial start-up" with OK.

Station sorting

You can later change the station sorting performed automatically
whenever and however you wish, see „TV menu –Settings–Stations–
Automatic search–Change stations" and conform with OK.
18.11.2004, 13:51 Uhr