Determining The Antenna Position For Digital/Terrestrial Stations Or Aligning The Antenna - Loewe DVB-T Instrucciones De Manejo

Initial start-up
Determining the antenna position for
digital/terrestrial stations or aligning the
antenna
If you receive one or more digital terrestrial stations (DVB-T) with picture
and sound interference using your room antenna, you should change the
location of the antenna.
For optimum alignment or determination of the suitable installation
location of the antenna your TV set has an indicator for the signal quality
C/N and signal strength Level.
Ask your dealer on which channels and frequency bands (VHF or UHF)
digital TV stations are broadcast in your area.
Several digital stations are transmitted on one channel.
Choosing a TV channel
1. Call the "TV menu" with the MENU button.
2. Select the "Settings" line and confirm with OK.
3. Select the "Channels" line and confirm with OK.
TV menu
Settings
Channels
Manual adjustment
4. Select the "Set manually" line and confirm with OK.
Manual adjustment
Range DVB-T
Channel E 05
Frequency 177.50 MHz
Name Test
Bandwidth 7 MHz
C/N 96 Level 99
DVB_T_S_GB_F_Esp
INFO
Parental lock Timer functions Language
...
DVB-S VHF
Store
END
Search
INFO
7
5. For digital programs select
"Range – DVB-T".
6. Enter the appropriate channel number with the numeric buttons.
The corresponding bandwidth 7 or 8 MHz is set depending on the
channel and country.
Notes
• You should only adapt the bandwidth if the channel spacing of the
stations in your area deviate from the standard.
• If you receive a digital station, the signal quality C/N and the signal
strength Level is displayed by a black bar/numeric value.
The antenna alignment or position is at an optimum when as high a
value as possible (large bar) is displayed for the signal quality and
signal strength.
Align the antenna to a maximum numeric value/bar.
• If no signal is found in the set channel, you can start the frequency
search within the selected band (VHF or UHF) by pressing the blue
button.
7. Check other channels on which digital stations are broadcast
terrestrially in your area one after another.
Align the antenna using the weakest station to as maximum as
possible a bar/numeric value.
Note
After the antenna has been positioned and aligned, we recommend the
END
"Automatic station search and store" function to search for all stations
(see page 8).
18.11.2004, 13:51 Uhr
7