Navigating The Setup Menu; Picture" Menu - Silvercrest LT 1510 Manual Del Usuario E Información De Servicio

Navigating the Setup Menu

To open or exit the setup menu, press the MENU button (50) on the remote control. Press  or 
(32) on the remote control to select a function, then press  or  or  (32) on the remote control
to select an option. Adjust the desired value with the  or  buttons (32) on the remote control. To
save the settings and return, press the MENU button (50) on the remote control again.
You can also perform menu settings via the buttons located on the side panel of your LT 1510. To open
or exit the menu, press the MENU button (18) on the side panel and press the buttons VOL+ (19)
(right), VOL- (19) (left), CH+ (17) (up) or CH- (17) (down) to navigate the menu.
When you exit the menu by pressing the MENU button (18), all settings will be saved automati-
cally.

"Picture" Menu

Picture Mode Select one of the picture settings Standard, Movie, Mild or Game. Select "Per-
sonal" to customize your settings.
Brightness * To adjust the brightness.
Contrast * To adjust the contrast.
Colour * To adjust the colour.
Sharpness * To adjust the picture sharpness.
Tint * To adjust the colour hue/tint (available only for the SECAM TV system).
Colour Temper- Choose either Warm (more red), Cold (more blue) or Normal (balanced colours)
ature according to your preferences. This feature can be selected only for the "PC"
signal source.
* These options are only available after choosing the "Personal" picture mode.
Signal Source "DTV" (Digital TV Reception)
21