Twin-Star International KC7005-T401-42 Manual De Instrucciones página 8

8. Push the slide frames in and align the slide rail,
attach the knob (FF) to the sliding frames.
Hardware Used
FF Knob (with bolt)
9. Choose desired height of U-shaped wood shelf (T)
and place the Shelf Pins (GG) into same height
shelf holes inside side panels. Insert the U-shaped
wood shelf (T), allow U-shaped wood shelf (T) to
rest on the Shelf Pin (GG).
Hardware Used
GG
Shelf Pin
10. Push the Connect blocks snug the towel rack and
make sure the end of the bar are seated in the
blocks.
Fig. 8
x 1
Fig. 9
x 4
Fig. 10
I
7
FF
T
GG
GG
J
K