Applying the Turning Flites
Expected service life
Storing and Shelf life
Safe Working Load (SWL)
Product care & Maintenance
Service & Maintenance
Customer support/Trouble shooting
1. Push the locked Velcro strap by hand between the mattress and the
patient´s hollow at the back.
2. Pull the sling carefully from the other side and attach the Velcro Strap
to the bed frame to which direction you want to turn the patient.
Position the Turning Flites and make sure the sling is not folded or
wrinkled. If needed, adjust the length of Velcro strap.
3. Check patient position, especially arm and legs before mounting to the
lifter.
4. Place the loop straps in the hanger bar according to the manual for the
lifter.
5. Carefully raise the hanger bar and perform the turning, while keeping
eye on the patient position.
The service life is expected to be 56 performed lifting sessions, however
this will be subject to the actual conditions during use.
The Turning Flites are disposable and designed for single patient use and
should be disposed after patient hospital stay or when soiled or subjected
to liquid.
The Turning Sling should be stored in a dry and clean environment and
the shelf lifetime is 5 years in original packaging. Store in temperatures
between 0°-40° C (+32°-104°F)
Max 100 kg / 220 lbs.
•
Always follow the instructions on the product label and check the
sling for deteriorations.
•
Mark the sling with the specific patient name and keep in dry and
clean environment.
•
This is a patient specific disposable sling, that must be disposed after
the patient has been discharged.
The Turning Flites shall be checked by authorized personnel according to
ISO10535
•
Please refer to the manual for the lifting equipment used
•
In doubt please contact your dealer who supplied the product
UK