Calypso Watches K8500 Manual De Instrucciones página 2

1.2 Charging instructions:
Please take care when connecting the watch, see hereafter how to connect correctly.
Important: Of the two ends of the watch strap, only one is the USB connection. Do not use the other end as it
may damage the watch.
1.1 Standby dial interface
1) By repeatedly pressing the power button you can change functions.
2) Browse the functions and select the desired one by pressing and holding the power button.
1.2 Step counter
The step counter is initiated automatically and gives details of the current number of steps made. All data is
reset daily at 00:00.
1.3 Heart rate
To monitor your heart rate, adjust the watch correctly on the wrist (on either hand) and select the heart rate
function. Connecting the watch to the Calypso APP will synchronize the heart rate data with the APP in real time.
1.4 Blood pressure
To measure blood pressure, adjust the watch correctly on the wrist (on either hand) and select the blood
pressure function. Connecting the watch to the Calypso APP will synchronize the blood pressure data to the APP.
1.5 Multi Sport Mode (walking, running, cycling, mountaineering, swimming, football, basketball, table tennis,
badminton, history)
1.5.1 Select the corresponding sports mode; once enabled, the display of information regarding the sports
activity appears, maintain the button pressed to pause at any time: press the button to continue the activity
tracking; click stop to save the data. The movement record can be viewed in the history.
1.5.2 Activity data will start to be saved only when the distance covered is greater than 200 meters or the
motion time is greater than 5 minutes; when the activity condition is not fulfilled a 'data is too little to be saved'
alert appears.
1.5.3 After the watch synchs to the Calypso APP, selecting the sports history interface in the Calypso APP
will synchronize the movement history data from the watch and you can view the detailed data in the Calypso
APP.
1.6 Sleep Monitoring
The Sleep monitoring time runs from 21:00 to 09:00 the next day and the data generated by the watch is sent to
the Calypso APP when synchronized.
1.7 Set up
1.7.1 Alarm
The alarm can be set on the Calypso APP which then synchronizes to the watch.