Configurations; Operation - WEG Anybus-CC Guía De Instalación, Configuración Y Operación

c

. CONFIGURATIONS

For detailed information regarding network installation, parameterization, protocols
and operation of the CFW-11, using the Anybus-CC modules, see the Anybus-CC
Communication Manual, supplied in the CD-ROM that comes with the drive.

3. OPERATION

Step  After installing the accessory, energize the drive.
Step  Make sure the accessory has been correctly installed, observing the value
of parameter P0723. This parameter should indicate the model of the
Anybus-CC module, according to the installed interface/protocol.
Parameter P0723 can be accessed through the following menu on the
HMI:
Figura 3: Accessory installation in the slot
01 PARAMETER GROUPS
49 Comunication
114 Anybus
d
3