Configurations; Operation - WEG Anybus-CC Guía De Instalación, Configuración Y Operación

c

2. CONFIGURATIONS

For detailed information regarding protocols, network installation, parameterization
and operation, using the Anybus-CC modules, see the Anybus-CC Communication
Manual, supplied in the CD-ROM that comes with the product.

3. OPERATION

Step 1 After installing the accessory, energize the equipment.
Step 2 Make sure the accessory has been correctly installed, observing the value
of parameter P0723. This parameter should indicate the model of the
Anybus-CC module, according to the installed interface/protocol.
Figure 3 (cont.): Accessory installation in the slot
d
3