Setting Up The Headphones - EAREBEL SF543/BTS Manual De Instrucciones

Setting Up the Headphones

Place the headphones with the earebel logo on the right side
1
and with the e logo on the left side.
2
Push the headphone from the inside of the
cap/headband outwards through the round
opening.
5
Check the po-
sitioning of the
headphones: The
thickening should
not be visible.
(Similar to illustrations.)
9
Only in the case of models with a slit in
the fl eece strip on the inside:
Guide the headphones through the slit in
the fl eece with the ear cushion upwards.
Push them up to the round opening in the
cap, while paying attention to the left and
right sides.
3
Right!
Repeat steps 1 to 4 on the other side
6
with the second headphone.
Now connect your earebel to a smart-
7
phone or player and enjoy perfect sound!
4
Press the thicken-
ing at the edge of
the opening into the
headphones.
Wrong!
EN