SAMES KREMLIN SLR S-BOX Manual De Explotación página 46

Soft start relay failed to close,
226 So.St
soft start monitor failed
227 r.ALL RAM allocation error
228 OI.SC Output phase short-circuit
229-
rES Spare
230
231 Cur.c Current calibration range
232 dr.CF Drive configuration
233-
rES Spare
234
235 Pb.HF Power board HF
236 No.PS No power board
237 FI.In Firmware Incompatibility
238-
rES Spare
244
Power board is in bootloader
245 Pb.bt
mode
246 dEr.e Derivative file error
247 Fi .ch File changed
Derivative product image
248 dEr.I
error
249 rES Spare
250 r.b.ht Hot rectifier/brake
251-
rES Spare
254
255 rSt.L
Indice de revisión : E - Julio de 2017
Hardware fault – Contact the supplier of the drive
Over-current detected on drive output when
enabled. Possible motor earth fault.
• Check for short circuit on the output cabling
• Check integrity of the motor insulation using an
insulation tester
• Is the motor cable length within limits for the
frame size?
Current calibration range error.
The hardware ID does not match the user software
ID.
• Hardware fault - Contact the supplier of the drive
No communication between the power and
control boards.
• Check connection between power and control
board.
The user firmware is incompatible with the power
firmware.
Re-program the drive with the latest version of the
drive firmware for Unidrive M200.
Power cycle the drive
Contact the supplier of the drive
Over-temperature detected on input rectifier or
braking IGBT.
46 6424