Bluetooth Audio - Pioneer MVH-S312BT Manual De Operación

Menu Item
PRESET 1-6
A.ANSR*
[ON], [OFF]
PB INVT
DEVICELIST
DEL DEVICE
[DELETE YES],
[DELETE NO]
ADD DEVICE
DEV. INFO
* If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.

Bluetooth audio

Important
• Depending on the Bluetooth audio player connected to this unit, the available operations will be
limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select
song, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone
automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit, operation and
information displayed may vary based on availability and functionality.
1
Make a Bluetooth connection with the Bluetooth audio player.
2
Press SRC/OFF to select [BT AUDIO] as the source.
3
Press BAND/
NOTE
You must reconnect the Bluetooth connection when the source is switched or the unit is turned off.
Description
Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (1/
to 6/ ).
Select [ON] to answer an incoming call automatically.
Invert the order of names in the phone book (name view).
Display the list of paired Bluetooth devices. "*" appears on the
device name when the Bluetooth connection is established.
When no device is selected in the device list, this function is not
available.
Delete the device information.
Register a new device.
Switch the device information on the display between the
device name and Bluetooth device address.
to start playback.
- 13 - - 13 -