Connect The Power Cord - Honeywell Home C2 Guía De Instalación Rápida

Installation
Launch the app
1 Launch the Honeywell Home app.
2 Create an account (if necessary), or sign
in to your Honewell Home account. Tap
ADD DEVICE or the plus sign.
3 Select the C2 Wi-Fi Camera to install,
then follow the instructions in the
Honeywell Home app to name the
camera and its location.

Connect the power cord

1 Plug the power cord's micro
USB end into the camera.
2 Plug the power cord's USB end
into the wall outlet adapter, and
plug your camera into a power
outlet.
3 Wait until the LED on the
camera blinks blue (about 1
minute), then tap NEXT.
NOTE: If the LED turns solid red, it
means the connection mode timed out. Unplug the camera
and plug it back in.
2