Honeywell Home C2 Guía De Instalación Rápida página 3

Connect
Connect to mobile device
1 Enable bluetooth on your mobile device.
2 The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app
will prompt you to select one camera
at a time. Each camera has a unique
MAC ID printed on the back. Use that
ID to select the camera you want to
connect.
3 A QR code will display in the app. To
connect your camera to the app, hold
the QR code approximately 3-6 inches
(7-15 cm) from the camera lens.
4 The camera LED turns purple and the camera beeps.
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network
you wish to connect your camera to.
1 Choose your Wi-Fi network from the
list. Tap NEXT.
2 Enter your Wi-Fi password, if necessary.
Tap NEXT.
NOTE: The camera will beep during some
steps in this process.
3