Status Led - Honeywell Home C2 Guía De Instalación Rápida

Status LED

The camera has an LED that gives device status.
LED
During installation
Blinking Blue
Solid Blue
Solid Purple
Blinking Green
Solid Green
Solid Red
During operation
Blinking Green
Solid Green
Blinking Red
Camera state
Powered up. Ready to begin setup.
Connected to App. Ready to complete setup.
QR Code scan complete.
Go to "Connect to Wi-Fi" on page 3.
Connecting to Wi-Fi network.
Connected to Wi-Fi and operating.
Setup timed out. Unplug camera, plug it back in, and
restart the process.
Connecting to Wi-Fi network.
Connected to Wi-Fi and operating.
Not connected to Wi-Fi.
7